Ford what is advancetrac

The following Ford vehicles have the AdvanceTrac technology in them:. When your Ford vehicle senses an issue in which there may be a loss of control, the vehicle may then swerve or skid. The vehicle may also lose traction. The light lets the driver know that the vehicle is braking while applying pressure and power to the wheels of the vehicle. The vehicle owner may experience a reduction of power in the engine too. The vehicle owner should allow the vehicle to make the necessary adjustments it has to make, while keeping steady hands on the steering wheel and driving.

Should the AdvanceTrac warning light illuminate as a solid light and not a flashing one, then there is an error that is within the AdvanceTrac system.

The vehicle owner needs to take the vehicle to a dealership or an auto professional ASAP. Even though the AdvanceTrac light may be illuminated in your car, you can still drive it.

Just make sure that as the light is on, and you prepare to get the vehicle serviced, you adjust your vehicle. This is necessary so that you are able to reduce the risk of losing traction or control of your vehicle. When your AdvanceTrac technology light returns to a blinking phase, then the vehicle will also return to a normal state, as it senses that the hazard no longer exists. However, if the light remains solid, then the AdvanceTrac system is not working properly.

Additionally, the entire operation of the vehicle is dependent on the driver. Therefore, you can assume that without full access of the AdvanceTrac technology, it is a bit less safe to operate the vehicle, compared to a functioning AdvanceTrac technology system. You want to make sure that you visit your Ford dealer as soon as possible to correct the issue, and ensure that there are no underlying issues that may be cause for concern.

Posted in Uncategorized. Leave a Reply Cancel reply Your email address will not be published. Search Vehicles. Contact Us. Arapahoe Rd. Read more. Faults need to read out in order to determine if the problem lies in the ABS unit or if it is a sensor or valve issue.

You may need to Most auto parts stores have a key fob tester sitting on their counter in which you can point your key fob at this sensor Car stopped suddenly and won't start again, makes the noise to start but won't fire up Hello.

If the engine will not even crank over then I usually start by trying to crank the engine over by hand. If it cannot be turned then there is a serious engine problem and the engine has failed. How can I tell if the motor mount needs to be replaced? This problem may or may not be detected visually—excessive engine movement may be seen while idling—or by feel—engine movement can cause contact with the chassis or something else on the car, which one can feel.

Sputtering and popping with a loss of power. Anti-Lock brake systems prevent a vehicle from skidding under panicked braking conditions. Traction control systems compare data from speed sensors at each wheel end location.

Vehicles now rely upon numerous sensors to identify vehicle instability, as skidding occurs. Sources of feedback for this operation include steering wheel angle sensors, yaw rate sensors, and accelerometers.

In any event, the system controller has registered a fault, which makes proper operation impossible. When faced with an AdvanceTrac system issue, you can still drive your vehicle without any ill-effects. However, most vehicles automatically disable all AdvanceTrac related functions, when an active system fault has been detected.

In this instance, your vehicle is simply attempting to bring your attention to an underlying fault in its stability system. In the meantime, it is also imperative to take extra caution when traversing slick or hazardous roadways, such as those encountered following wintry precipitation or heavy snowfall.

This light will almost certainly reilluminate with the next cycle of the ignition, as your vehicle performs its standard system self-checks.

In the vast majority of cases, diagnosis of the issue at hand will require the use of a premium scan tool , and a trained eye. However, the avid DIY mechanic can always perform their own visual inspection in an attempt to root out obvious concerns. Look for any signs of frayed, pinched, or corroded wires.

Also, check to ensure that all connections between these sensors and their intermediate harnesses are viable. Unplug each speed sensor pigtail from its intermediate harness to check for water intrusion. In some cases, it might also be possible to check for supply voltage and ground at corresponding modules within the system. Without full system input voltage, and a stable, resistance-free ground feed, the AdvanceTrac system can experience interruptions in operation.

In any event, a vehicle-specific wiring diagram or pin-out reference will be required to conduct such checks. If you are still unable to locate any obvious source of failure, or simply do not feel comfortable tackling the diagnosis of the AdvanceTrac system yourself, contact a qualified service center for further evaluation.

In some cases, a simple programming update can be installed, to rid your vehicle of AdvanceTrac related software issues. In this case, a trip to the dealership will be necessary, as such software updates tend to be proprietary in nature. My service advance Trac light came on for a few minutes in my Mercury Milan.